Here are some tips to unblock a toilet. If you are having trouble with a blocked toilet Dalston, you can use these useful tricks.1. Only use high quality toolsThere are many plungers available in the market. Some can be relatively cheaper than the others. However, a plunger is supposed to work at a heavy duty pace. Thus, it is recommended that you use a high quality plunger that can fold or form a seal. A suction cup that is low in quality may not be able to bend or work properly. When you want to make a seal, wrap an old rag around the tool so it stops any leakage. If the plunger is stiff, you can boil water and run it under the water. This can soften the plungers rubber.2. Inserting the plunger inside the toilet bowlThe plunger has to completely cover the entire hole. Submerging the plunger in the bowl allows it to be effective when pushing the water. It will also pull water instead of the air. Continue the step several times until the toilet starts draining. Plunging takes patience. It can take up to 20 times before the drain works properly again. The effort must be done repeatedly. Flush the toilet to see if its already working.3. Use homemade cleanerHomemade cleaner has many benefits. The most obvious one is that it has no chemical substances. Baking soda, vinegar, and hot water makes a great homemade drain cleaner. Remember to keep the water temperature warm instead of hot. So let it sit before using it. Hot water may cause the porcelain of the toilet to crack.4. Use a plumbing snakeA plumbing snake or auger is a flexible wire that can curve and bend to reach the blockage. You can also get this at a hardware store to clear the clogs.